Medical heater MS-3000
Model name / item name
AC220V / 60HZ
Maximum power consumption
|No. 01||Power code||No. 09||Bottom temperature button (Increase temperature)|
|No. 02||Earth leakage circuit breaker||No. 10||Bottom temperature button (Decrease temperature)|
|No. 03||Main power switch||No. 11||LED switch|
|No. 04||Power switch||No. 12||LED operation display lamp|
|No. 05||Time button (Increase time)||No. 13||Operation time display|
|No. 06||Time button (Decrease time)||No. 14||Top temperature display|
|No. 07||Top temperature button(Increase temperature)||No. 15||Bottom temperature display|
|No. 8||Top temperature button(Decrease temperature)|
How to operate / How to use
Connect the main power button.
Operate the earth leakage circuit breaker, and turn on the main power switch.
Leave the PCB power switch as 'ON'.
Set the operation time.
Adjust the temperature of the upper part of the device. (Adjust the temperature in units of 5˚)
Adjust the temperature of the lower part of the device. (Adjust the temperature in units of 5˚)
Turn on the LED lamp switch if you wish to feel the LED light.
Operation time of approximately 30~40 minutes is appropriate, and you may adjust the time in accordance with your body type or condition.